| TENSOPROT
- All-Purpose Cleaner
with
skin caring milk proteins
Product
Description:
TENSOPROT is a protein-based
cleaner. Due to its high effectiveness, cleaning power and
the shine finish, it brings exceptional cleaning results even
when applied in smallest doses.
The all-purpose cleaner
TENSOPROT
is extremely economical because of the incomparably high fat
solving effect of the base material used and the resulting
very low dosage of active ingredients.
Moreover, the basic active ingredient used for
TENSOPROT
is made from natural, renewable raw materials. Its easy biodegradability
allows a novel environment-friendly cleaning process.
In addition to that, this active ingredient proved to be very
skin compatible in dermatological tests.
Although virtually non-polluting,
TENSOPROT
gives excellent cleaning results and leads to brilliant cleanness.
Components
under the recommendation of the EEC Commission:
< 5% non-ionic surfactants (sugar surfactants).
Contains preserving agents
Further
components:
Complex formers, thickening agents, protein hydrolisate, essential
oils. pH neutral.
Fields
of Application:
TENSOPROT
is suitable for all washable, smooth, and shining surfaces
made of ceramics, metal, plastics, wood or lacquer.
TENSOPROT
is well suited for all glass surfaces, for tiles, sinks, fittings,
and bathtubs.
Further fields of application are the cleaning and stain removal
of upholstery and carpets.
Dosing
and Application:
Windows, mirrors, and other glass surfaces:
5 to 10 ml (1 dash) for 5 litres of water. Lowest dosage for
glass. If streaks occur, wash again with plenty of water.
Wash glass surfaces, then wipe with a dry piece of cloth,
polish with chamois leather, or use a rubber squeegee.
Floors
(also wooden floors), tiles, ceramics, fittings:
Depending on the degree of soiling, use 5 - 10 ml for 4 litres.
Stainless
Steel Surfaces:
Spread
TENSOPROT
on a wet piece of cloth and apply on the surfaces that have
to be cleaned. Allow to work for a few minutes, then rinse
with water or with a wet piece of cloth and polish with a
dry piece of cloth.
Due to its high fat solving effect,
TENSOPROT
is particularly suitable for cleaning and degreasing installations,
tiled walls and floors in food industry.
Upholstery
and Carpets:
10 ml for 1 litre of water. Clean with soft brush or piece
of cloth.
For heavier soiling:
Spread
TENSOPROT
on a wet piece of cloth or on a brush and rub in. Then clean
with water.
TENSOPROT in
the dishwasher (less rust stains on the cutlery,
shining tableware): Add 10 ml of
TENSOPROT
to tabs or powder in the dosing unit of the dishwasher. You
do not need any rinsing agent. Also to be used as washing-up
liquid in the sink.
TENSOPROT
as fat solvent (burnt pots, grills): Allow
to soak in the sink for a short while. Then wipe effortlessly
with a sponge.
Fat on the cooker hood – use undiluted for the removal
of heavy soiling.
TENSOPROT
as stain remover (removes fat, grass, ink
or other stains on textiles): Apply undiluted
TENSOPROT
and wash.
TENSOPROT
against traces on floors (traces of soles
on floors; particularly suitable for plastic floors): Traces
can easily be removed. Use undiluted for the removal of heavy
soiling.
TENSOPROT
as jewellery cleaner: Perfect cleaning of
gold, silver and costume jewellery; shining surface. Add 10
ml of
TENSOPROT
to ¼ litre of water. Clean necklaces with a soft toothbrush.
TENSOPROT
as window cleaner: Clear sight in the car,
no streaks, removes also the wax used in the car washing plant.
Use 10 ml of
TENSOPROT
for 5 litres of water in the windscreen washer. It is perfectly
compatible with anti-freeze agent.
TENSOPROT
as car wash detergent: Cleans car paint gently
and gives shine. Add 10 ml to 5 litres of water. Clean paint
with wet sponge and rinse with clear water.
|